漳州出厂运费(华中、华南、华东)
¥ 700.00 ¥ 700.00 700.0 CNY
Jacobi的酸洗椰壳活性炭,Calgon煤质活性炭及柱状活性炭; 国产椰壳活性炭(黄金炭除外),请就近选择该仓库出货。7天内出厂。
福建广源牌1100碘黄金炭5-10目,4-8目高吸金量
¥ 12.50 ¥ 12.50 12.5 CNY
广源椰壳活性炭单价,RMB/KG,含税福建漳州出厂。

销售指标:以原厂指标为准。
关键指标简略列出如下:碘吸附值≥1100mg/g,粒径4-8目或5-10目可选,筛上5.0%以内,筛下5.0%以内。

广源碳素团队由从事椰壳活性炭生产研发和活性炭应用技术研究的专业人士组建,专注于椰壳活性炭行业超过18年历史。目前广源已经取得ISO9001认证,生产能力达到3000吨椰壳活性炭每年。生产设备采用自行研发的具备国际一流水平的物理法活化回转炉,生产能力高出普通商品级回转炉25%,吨产品节能34%,为生产高品质产品打下坚实基础。
福彰NS果壳活性炭价格,5%水分水处理食品级活性炭
¥ 6.00 ¥ 6.00 6.0 CNY
一、福彰果壳壳活性炭价格及条款
(5%或10%水分可选择,果壳活性炭价格)
1. 以上活性炭价格为单次出货量5吨以上的不含增值税出厂价,具体送到价格请联系我司销售人员。
2. 少于5吨的订货数量的价格,单价+500元每吨。
3. 请通过对公账号付款。
4. 包装:25公斤每包,编织袋中性包装,每托盘500公斤。
5. 交货期:20吨以内,付款后7天内发货。
6. 质量保证:以销售指标为唯一标准。

二、活性炭销售规格
碘吸附值, GB/T 12496.8-2015
水分, GB/T 12496.4-1999
强度 ≥95% GB/T 12496.6-1999
粒度 (以8X20为例)GB/T 12496.2-1999
8目筛上≤5%
20目筛下≤5%

三、产品特点
不同于普通的国产果壳炭10%的水分,福彰NS系列果壳炭可选择5%水分或10%水分。NS系列采用杏壳或山桃壳为原料,产出的活性炭具备高碘值同时高硬度的特点。该产品炭粉少,耐磨损,用于饮料厂等需要周期性高温灭菌和高强度反冲洗的应用场景。

四、产品适用范围
果壳炭较煤质炭硬度高,粉尘少,去除余氯能力强。可用于反渗透系统的预处理,保护RO膜免受余氯氧化。果壳炭也可用于家庭用中央净水器滤料,具备寿命厂,成本适中的特点。
蔗糖精炼脱色颗粒活性炭pH值稳定
¥ 15.00 ¥ 15.00 15.0 CNY
CANETSC12X40 is virgin activated carbon designed fortreatment of cane sugar liquors. In addition to the greatdecolorization power available in this high surface area carbon,CANETSC has pH controlling ability as a result of theincorporation of magnesite within the carbon granules. CANECAL is used in both fixed and moving beds for continuousde-colorization, after which the carbon can be thermallyreactivated for repeated use. The particle size of 12x40 meshhas been selected to give a high rate of adsorption and lowresistance to flow with liquors of medium viscosity.CANETSC is made from selected grades of bituminous coalcombined with suitable binders to give superior hardness andlong life. Produced under rigidly controlled conditions by hightemperature steam activation, this carbon provides highsurface area, large pore volume, high density, and a porestructure optimal for the adsorption of color bodies fromsolution
除硫化氢酸性气体柱状活性炭载体炭改性炭氢氧化钾
¥ 15.90 ¥ 15.90 15.9 CNY
KOH, wt% Expressed as KOH, 7%min
Apprarent Density for base carbon, 0.45 g/ml min, 0.55g/ml max, ASTM D 2854
Ball-Pan hardness, 95min. ASTM D3802
Particle Diameter, 4±0.4mm, ASTM D2862
Moisture, as packed, 15%max, ASTM D 2867
Carbon Tetrachloride, base carbon, 60% min, ASTM D 3467-94

Warning: Operating below 350 centigrade, otherwise burning would happen.

Lead time: 15-30days after order confirmation and 30% downpayment.
除硫化氢酸性气体柱状活性炭载体炭改性炭氧化铜
¥ 20.70 ¥ 20.70 20.7 CNY
CuO, wt% Expressed as CuO, 5%min
Apprarent Density for base carbon, 0.45 g/ml min, 0.55g/ml max, ASTM D 2854
Ball-Pan hardness, 95min. ASTM D3802
Particle Diameter, 4±0.4mm, ASTM D2862
Moisture, as packed, 15%max, ASTM D 2867
Carbon Tetrachloride, base carbon, 60% min, ASTM D 3467-94

Warning: Operating below 350 centigrade, otherwise burning would happen.

Lead time: 15-30days after order confirmation and 30% downpayment.
除硫化氢酸性气体柱状活性炭载体炭改性炭碘化钾
¥ 22.50 ¥ 22.50 22.5 CNY
KI impregnated, 1.8 %min
Apprarent Density for base carbon, 0.45 g/ml min, 0.55g/ml max, ASTM D 2854
Ball-Pan hardness, 95min. ASTM D3802
Particle Diameter, 4±0.4mm, ASTM D2862
Moisture, as packed, 15%max, ASTM D 2867
Carbon Tetrachloride, base carbon, 60% min, ASTM D 3467-94

Warning: Operating below 350 centigrade, otherwise burning would happen.

Lead time: 15-30days after order confirmation and 30% downpayment.